THIS IS AN ARMY NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION
UNIT: AASF#2
LOCATION: 2 Vacancies at this location: Saint Cloud, Minnesota
SELECTING OFFICIAL: MSG Donnie Hance (65**********)
ARMY NATIONAL GUARD MEMBERSHIP IS REQUIRED
Major Duties: This is not an all-inclusive list
A AIRCRAFT MECHANIC (T32), WG-8852-10/11,
WG10:
(1) Perform inspections, functional checks, and preventive maintenance on assigned aircraft to include pre-inspection, daily inspection, pre- and post-flight inspections and such special inspections as required, including fuel contamination checks, oil sampling, an inspection of onboard emergency equipment. Conducts checks on hydraulic, electrical, transmission, power systems, etc.
(2) Troubleshoots, diagnoses, and performs unscheduled maintenance on assigned and transient aircraft. Performs the full range of repair and testing of aircraft system, assemblies, and surfaces. Using a variety of methods involving test equipment, visual checks and instruments, diagnoses and identifies problem areas and determines the extent of repairs required. Removes components and assemblies, repairs or replaces defective parts and components and reassembles repaired items into the aircraft. Installs, aligns, and makes needed adjustments to major components and assemblies such as engines, propeller/rotors, transmissions, hydraulic systems, etc., assisting Specialists as required. Accomplishes adjustments to related systems which may be affected by repairs. Conducts ground functional tests of all aircraft systems. Services aircraft with oil, de-icing fluid, fuel, and hydraulic fluid. Launches and recovers assigned and transient aircraft; performs inspections prior ot takeoff. Inspects for conditions such as oil, fuel, and hydraulic leak, cut lines, tires and loose panels.
(3) May be required to perform such additional duties as fire fighting, aircraft crash/rescue, snow removal, etc. (4) Perform other duties as assigned.
WG11:
(1) Performs Crew Chief duties with full maintenance responsibility for assigned aircraft. Number of aircraft to be assigned to an incumbent is predetermined by taking into account such factors as the complexity, size, and maintenance requirements of aircraft, the unit mission requirement to have Flight Mechanic or Flight Engineer on board during missions, etc. Diagnoses problems with all aircraft system and components, perform required repairs and accomplishes required preventive maintenance. Serves as a point of contact for assigned aircraft, receiving written and verbal discrepancies from pilots and diagnosing problems. Documents deficiencies, malfunctions, and the repairs required to return aircraft to serviceable condition. Contacts Allied Shops personnel to perform specialist work in such areas as sheet metal, avionics, propeller-rotor, engine, etc., and oversees the work performed. Assigns and directs the work of one or more subordinate air craft mechanic(s) to include less than journeyman level. Accompanies pilot during flights to locate discrepancies that are not evident during ground operation. May perform duties as a crew member (Flight Mechanic or Flight Engineer) during assigned missions on aircraft with that requirement.
(2) Performs the full range of preventive maintenance, repair, and ground testing of aircraft system, assemblies, and surfaces. Using a variety of methods including test equipment, visual checks, and instruments diagnoses and identifies problem areas and determines the extent of repairs required. Removes components and assemblies, repairs or replaces defective parts and components, and reassembles repaired items into the aircraft. Installs, aligns, and makes needed adjusts to major components and assemblies such as engines, propeller/rotors, transmissions, hydraulic systems, etc. Accomplishes adjustments to related systems which may be affected by repairs. Conducts ground functional tests of all aircraft systems. Accomplishes or monitors the performance of periodic inspection, daily inspections, refueliug/defueling of aircraft, and all servicing operations.
(3) Plans and conducts a flight training program for drill status crew chiefs to include maintenance instruction for assigned aircraft, the use of hand and arm signals used, ground handling of aircraft, use of ground equipment, aircraft loading, hoist operations, emergency procedures, etc. Performs duties as a Flight Mechanic/Flight Engineer Bas required to carryout the unit mission, and as such carries out pre-flight, inflight, and post flight duties.
(4) Performs other duties as assigned.
CONDITIONS OF EMPLOYMENT
In order to qualify, you must meet the experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. In describing your experience, please be clear and specific. We will not make assumptions regarding your experience. Do not copy and paste the duties, specialized experience, or occupational assessment questionnaire from this announcement into your resume as that will not be considered a demonstration of your qualifications for this position.
MILITARY GRADES: E-7/SFC and below
Failure to obtain a compatible MOS may result in termination of employment.
GENERAL AND SPECIALIZED EXPERIENCE QUALIFICATIONS REQUIREMENTS:
Work involves the maintenance, troubleshooting, repair, overhaul, and modification of fixed and rotary wing aircraft systems, airframes, components, and assemblies, where the work requires substantive knowledge of the airframe and aircraft mechanical, pneudraulic, and/or electrical systems and their interrelationships. Some work situations within this series may require varying levels of electronics knowledge.
Minimum Requirements:WG- Experience or training that has provided the candidate with the skill to remove and replace aircraft parts, accessories, and components, and to make adjustments and settings according to established specifications. Must be skilled in the use of hand tools and test equipment.
WG -10 - Experience or training installing, adjusting, aligning, troubleshooting, and functionally testing the various major and minor mechanical and pneudraulic systems on an aircraft during overhaul or modification. Experience coordinating the work of other mechanics, and scheduling maintenance to ensure completion of critical actions and optimum workflow. Must have the ability to instruct lower graded mechanics, military and other personnel in the disassembly and re-assembly of crash damaged engines, transmissions, gearboxes, hydraulic components, and fuel controls sufficient for the exhibit to be returned to its shipping container.
WG-11 and above- In addition to journey-level experience or training equivalent to or exceeding the WG-10, positions at this grade level may include performing duties as a dedicated crew chief. Other positions may include responsibility for performing, coordinating, and/or overseeing the work and any periodic inspections to be done on an aircraft whether it is alone, or with the assistance of other mechanics and/or workers. Some positions may include coordinating the work of other journey-level workers in other trades to work simultaneously on the aircraft. Other positions may include serving as the technical authority to advise on, examine, and approve all airframe, mechanical, electrical, and pneudraulic repairs of assigned aircraft.
Additional Applicable job element factors: Knowledge of Equipment Assembly, Installation, Repair etc., Technical Practices (theoretical, precise, artistic),Use of Measuring Instruments, Ability To Interpret Instructions, Specification, etc. (includes blueprint reading), Ability To Use and Maintain Tools and Equipment, Trouble shooting.
EDUCATION: NA
You must provide transcripts or other documentation to support your Educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position.
REMARKS: No PCS available. Position will not be filled until current incumbent vacates. Sensitivity Level 2. Participation in direct deposit is mandatory. - Males born after 31 December 1959 must be registered for Selective Service.
Acceptance of a Technician position may result in the termination of your Selected Reserve bonus.
IMPORTANT NOTES:
Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. .
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
Send me jobs like these
Aircraft Mechanic, Mechanics in St. Cloud, Sherburne County, Minnesota, United StatesLooking for Aircraft Mechanic jobs in US?
Browse hundreds of latest Aircraft Mechanic vacancies updated daily on one of the top US's aviation job sites. Aviation Job Search prides itself in helping thousands of people build their Aircraft Mechanic careers in US.
Click below link to browse other Aircraft Mechanic opportunities in US:
View all Aircraft Mechanic Jobs
If you're an employer looking for Aircraft Mechanic recruitment, get in touch with us by clicking on the link below:
Hire Aircraft Mechanic Now