about 1 month ago
Production - Manufacturing
Kent, WA, US
Job ID: 23299
Req ID: PCC-US.224679
Job Type: Full-time
Date Posted: :54:48
Quality In-Process Inspector
Precision Castparts Corp. (PCC) is a leading worldwide, diversified manufacturer of complex metal components and products. It serves the aerospace, power, and general industrial markets. PCC is the market leader in manufacturing large, complex structural investment castings, airfoil castings, and forged components used in jet aircraft engines and industrial gas turbines. The Company is also a leading producer of highly engineered, critical fasteners for aerospace and other general industrial markets, manufactures extruded seamless pipe, fittings, forgings, and clad products for power generation and oil & gas applications, and supplies metal alloys and other materials to the casting and forging industries. PCC is a high quality business with dominant positions in most segments of the markets in which it serves. The company has a history of superior earnings growth and was the fourth best performing stock in the S&P 500 during the last decade, up 1580%.
Headquartered in Portland, Oregon, this over $10 billion publicly traded company (NYSE: PCP) employs more than 29,500 people worldwide. PCC has over 160 plants and has a presence in twenty-six states in the US and in over a dozen countries. PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers and shareholders while continually pursuing strategic, profitable growth.
Effective early February 2016, Berkshire Hathaway, led by chairman and CEO Warren E. Buffet, acquired Precision Castparts Corp. Mr. Buffet stated, “I’ve admired PCC’s operation for a long time. For good reasons, it is the supplier of choice for the world’s aerospace industry, one of the largest sources of American exports. Berkshire’s Board of Directors is proud that PCC has joined Berkshire.”
“We are very pleased to be joining forces with Berkshire Hathaway,” said Mark Donegan, PCC’s chairman and chief executive officer. “We see a unique alignment between Warren’s management and investment philosophy and how we manage PCC for the long-term. We believe that as part of Berkshire Hathaway, PCC will be exceptionally well-positioned to support our customers’ needs into the future. This transaction offers compelling and immediate value for our shareholders, and allows PCC’s employees to continue to operate in the same manner that has generated many years of exceptional service and performance to our customers.”
PCC Aerostructures is a leading supplier of complex components and assemblies to the global aerospace industry.
PCC Aerostructures now includes more than 35 plants in the U.S, Europe and Asia with over 5000 employees and has ambitious growth plans. Businesses within PCC Aerostructures include Primus International, SPS Aerostructures, Centra, Avibank and AVK, Klune, ProCoat, Southwest United Industries, Progressive Incorporated, Synchronous, Noranco and Kalistrut. Plants locations include Washington, Utah, California, Oklahoma, Kansas, Texas, Ohio, Canada, Mexico, the UK and China.
Located in Kent Washington, Protective Coatings Inc. is a leading provider of full service finishing for the aerospace, electronics and medical industries in both commercial and defense applications. Services include but are not limited to non-destructive testing such as fluorescent penetrant and magnetic particle inspection and a wide variety of surface enhancement processes such as shot peening and abrasive blasting, passivation, cadmium and nickel zinc plating, chromic, sulfuric and boric sulfuric acid anodizing and the application of chromate conversion coating on ferrous and non-ferrous alloys. Organic coating includes the application and testing of multiple resin systems such as epoxies, phenolics, polyurethanes, polyesters, elastomerics, intumescents, lacquers, alkyds, acrylics, dry-film lubricants, powder coatings and Teflon. Current approvals include the National Aerospace and Defense Contractors Accreditation Program, (NADCAP), Boeing Commercial Aircraft Company, Boeing Defense and Space, Boeing/Philadelphia, Boeing Long Beach, Grumman, Gulfstream, Lockheed Martin, Goodrich, Bombardier, Cessna and Sikorsky among much else.
Founded in 1976, Protective Coatings Inc. was later acquired by Precision Castparts in 2012, and became part of the Aerostructures Division. Staffed with approximately 300 employees, the facility generates annual revenues in excess of $26 million. As a defense contractor Protective Coatings Inc. is registered with the Directorate of Defense Trade Controls as a subsidiary of Precision Castparts Corp and is fully compliant with all relevant facets of the International Traffic in Arms Regulations and the Export Administration Regulations.
Selected candidates for a Level 1 Quality In-process Inspector will be expected to perform in-process checks, conformance tests, and verify appearance criteria compliance to specification requirements in regards to aerospace finishes, and surface enhancement or treatment applications. Candidates must have the ability and desire to be flexible and adaptable in a fast-paced production environment, be resourceful and innovative along with presenting a strong business ethic and compliance to leadership and company policies, and a good communicator with the ability to represent the company in a positive manner. The level 1 candidate will also be expected to perform a variety of quality control tests specifically for the plating and chemical treatment area, and paint department for primer and dry-film lubricant finishes. Types of inspection tests will include: visual inspections, adhesion testings, chemical testings, and measured thickness of coatings using Permascopes, to name a few. Level 1 Inspectors shall demonstrate basic computer skills, and will be required to perform recordkeeping of quality testing results. As a condition of assignment, Level 1 Quality In-process Inspector candidates may be expected to process product controlled under the International Traffic in Arms Regulations and/or Export Administration Regulations. As such these candidates may be required to provide proof of U.S. Citizenship, Legal Permanent Residence or protected status as a Non-Citizen National of the U.S.
Primary Duties & Responsibilities:
• Understand, adhere, and demonstrate to the company’s commitment to QUALITY and SAFETY!
• Maintaining regular and punctual attendance according to shift-times or a pre-arranged work schedule.
• Follow all policies, procedures, and work instructions.
• Wear and maintain proper personal equipment (PPE).
• Perform visual in-process inspections and basic testing of finishes (plating and painting) to confirm conformance to specification and/or customer requirements.
• Performing calibration and verification of calibration of inspection equipment used in measurement of thickness of applied coatings.
• Perform recordkeeping of quality testing results.
• Excellent vision whether or not corrected including normal color vision.
• Good communication skills.
• Ability to work alone or as a member of a team, good cooperative skills.
• Ability to stand for prolonged periods with limited movement.
• Ability to use coating thickness gages (i.e. Permascopes) to measure paint and plating thicknesses.
• Familiarized with aerospace finish process specifications and the ability to interpret required finish criteria and testings.
• Understanding of Configuration Management.
• Blueprint reading experience in finish applications is preferred, but not required.
• Basic computer skills in MS Word and Excel is preferred, but not required.
Level of Education:
• General Standard education including the ability to read and write in English.
Precision Castparts Corp. is an equal opportunity employer committed to recruit, hire, train, and promote in all job categories without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status or other status protected by applicable law.